How To Thaw A Window Ac Unit

Download Commodity

Download Article

When you're using your fundamental AC system a lot and running it at especially cold temperatures, the wet that accumulates on information technology tin freeze and cause information technology to cease working properly. This can happen fifty-fifty during the hottest spells of summer weather — the fourth dimension when you need that cool air the most! Have a few piece of cake steps immediately to defrost your key air conditioner in order to continue your abode nice and cool.

1. one

   Turn the Air-conditioning unit of measurement completely off every bit presently every bit you notice signs of frost. Locate the power switches on the thermostat and near the condensing unit exterior and switch them off. Go to your dwelling house's billow box and flip the breakers that control the cooling system off to be extra certain it doesn't plow on while yous thaw information technology out.^[1]

   • Signs of frost include visible ice crystals on the unit and/or warm air blowing out of the unit.
   • If yous go out your AC unit running when it'south frosty, the problem can get worse and your unit could require costly repairs to fix.
   • If the breaker that controls your AC organisation also controls other things that you don't want to turn off, it's okay to get out the breaker on. Turning information technology off is just an extra precaution.
   • In the meantime, employ fans or a portable Air-conditioning unit of measurement to keep your home cool if you tin can't bear the oestrus.

2. two

   Let the air conditioner thaw out for at least 24 hours. Pocket-sized frost might cook in as little as a few hours, but more serious frost typically takes up to a full day to thaw completely. Wait at least a day or more to exist on the safe side and brand sure that all the ice is gone.^[2]

   • Check the Air conditioning unit of measurement'southward coils to make sure that there are no visible ice coils on them before proceeding.
   • If you desire to speed upwardly the melting process, smash the unit of measurement with warm air from a blow dryer on the LOW setting merely.
   • Don't pour hot water onto an Ac unit to try and melt the frost. Information technology is an electrical organization and tin can become damaged this way.

   Advertisement

3. iii

   Wipe h2o and condensation up from the AC unit of measurement with a towel. Inspect your air conditioner for pooled h2o and condensation. Soak any puddles and droplets upwards completely with a dry out towel to remove excess moisture.^[3]

   • Accumulations of moisture are what freeze when yous run your Air conditioning at cold temperatures for long periods of fourth dimension, and then that's why it's important to soak up all the excess moisture before y'all utilise the system once again.

4. 4

   Turn the AC organization back on. Flip the breakers that control the organization back on at your billow box. Plow the power switch well-nigh the outdoor condenser unit back on, so turn the thermostat back on and fix it to the temperature you want.^[4]

   • If the problem of your AC unit of measurement frosting over repeats itself, try some of the techniques from the frost prevention method beneath to run across if they solve the problem.

Advertising

1. 1

   Clean the air conditioner's filter. Plow off your air conditioner. Loosen the fasteners that hold the grille to the front of the blower unit inside your home and remove the grille. Pull out the filter and vacuum it if there is merely a light layer of grit on it, or rinse it off and let it dry out if there is caked-on dirt and grime.^[5]

   • Muddy air filters crusade the system'south coils to get dirty, which tin can lead to freezing.
   • If it's been more than 1 calendar month since you changed the filter, replace information technology instead of bothering to clean information technology.

2. 2

   Clean the air conditioner coils. Plow off the Ac unit. Unscrew the admission panel at the dorsum of the condenser and remove it. Spray a commercial coil cleaner onto all the copper coil tubes, wait the amount of time specified on the packaging, and wipe it off with a clean rag to remove dirt and grime from the coils.^[6]

   • When the coils get dirty, they get as well cold and wet that accumulates on them freezes over.

3. 3

   Check the condensate bleed line for clogs and clean it if necessary. Await for the white PVC or copper tubing about the outdoor condenser unit. Inspect this condensate bleed line for whatever visible materials clogging information technology, such equally leaves or other debris. Look for pools of water and condensation buildups in the system besides, which can also exist signs of clogs.^[7]

   • If you observe that the bleed line is chock-full, pour ane/four cup (59 mL) of distilled white vinegar into the T-shaped access pipage on the drain line. Wait 30 minutes, and then affluent the drain line out with water to clear clogs.

4. four

   Telephone call an HVAC technician to check the refrigerant and recharge it if needed. Low levels of freon, the coolant used in AC units, can be a cause of frost problems. Refilling freon is dangerous, then always have a professional do this and never effort to exercise it yourself.^[8]

   • An HVAC technician volition also be able to inspect your system for refrigerant leaks and repair them if they notice whatever.

5. 5

   Run your Air conditioning unit of measurement at no lower than 78 °F (26 °C). This is the optimal temperature to set up your thermostat to. It keeps your dwelling cool when it's hot exterior without being so cold that it causes the unit to freeze over.^[9]

   • When you're asleep, run the AC at 82 °F (28 °C) to save free energy. When you're away, don't set information technology any lower than 85 °F (29 °C).

Advertizement

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

• If yous've defrosted your air conditioner and tried frost prevention techniques, simply the trouble persists, call a professional person HVAC technician to come inspect the arrangement.^[x]

Thank you for submitting a tip for review!

Advertising

• Don't cascade hot h2o on an AC unit to try and defrost it. H2o can damage electrical components.

• Never try to recharge your air conditioner's freon yourself. It is dangerous and should but be washed by a professional person.

Advertisement

Near This Article

Thanks to all authors for creating a page that has been read 5,069 times.

Did this article assist you?

Source: https://www.wikihow.com/Defrost-Your-Air-Conditioner

Posted by: blanchardhologe.blogspot.com

Share this post